7. Trouble Shooting
a. Q: Can not control the specific blind.
A: The blind number does not set properly
S: Reset the operation program.
b. Q: Loud noise from the motor.
A: The front shelf and back shelf are not installed on a straight
line;
The space is too small between the Aluminium tube and shelves
or the product is over loading.
S: Adjust the front shelf or the back shelf until they are
alignment, leave 1-2mm space between the tube and shelves
and does over loading.
c. Q: Remote control and control pad not function.
A: Problem with supply of electricity, the distance is over
12 meters, batteries for the remote control and receiver.
S: Check the distance that is not over 12 meters, supply of
electricity, the socket, and the batteries in the remote control,
remove obstacle object away from the receiver.
d. Q: The transmission box does not stop automatically on
preset position when the Red lamp is flashed.
A: Improper use the button or the setting of operation program
is incorrect.
S: Turn off the electricity for over 10 seconds. Restart the
unit and set the operation program again.
e. Q: The Red lamp does not light up when turn on the unit.
A: There is no electrical supplied.
S: Check with the supply of electricity.
|
